TaylorMade

TaylorMade Milled Grind 3 Black Wedge - Custom Fit

TaylorMade Milled Grind 3 Black Wedge - Custom Fit
New Arrivals
Custom fit
TaylorMade

TaylorMade Milled Grind 3 Black Wedge - Custom Fit

Product Options

  • Dexterity:
  • Bounce:
    ?

    Bounce option tooltip

    Wedge bounce is the angle created between the leading edge and the lowest point of the sole or trailing edge. This is the area of the club that hits through the ground as it strikes the ball. The greater the bounce degree, the higher the leading edge is off the surface at address.

    Having the proper bounce promotes optimal contact, control and ball spin.

    Close
  • Loft:
    ?

    Loft option tooltip

    Loft is the primary factor in the golf balls trajectory. The greater the loft, the higher the ball flight will be.

    Close
  • Shaft:
    ?

    Shaft option tooltip

    The golf shaft uses the centrifugal force of the swing to generate clubhead speed for striking the golf ball. By picking the correct shaft type to match your swing speed, you'll add distance, consistency and performance to your game.

    Close
  • Flex:
    ?

    Flex option tooltip

    The flex determines a shaft’s ability to bend during a swing, affecting clubhead speed, distance and control.

    Which flex you use will depends on the type of swing you have. Beginners and those with less powerful swings tend to use a shaft with greater flexibility to create more clubhead speed. However, if a player has a high swing speed, they will require a stiffer shaft with less flex.

    Close
  • Shaft Length Adjustment:
    ?

    Shaft length tooltip

    Getting the correct shaft length benefits you in several ways. We are all different in height and our wrist to floor measurements. Having the wrong length shafts can hinder your address position, stop the clubhead sitting correctly at address & impact and cause lack of accuracy and consistency.

    Close
  • Lie Angle:
    ?

    Lie angle tooltip

    Lie angle is a factor that affects the accuracy of golf shots. Golfers who use clubs whose lie angles don't fit their body types and/or golf swings are costing themselves strokes. Too upright and the heel strikes the turf first closing the clubface, while too flat and the toe makes contact first opening the clubface.

    An “off the shelf” club has a standard lie angle and you can usually choose between ½” or 1” increments upright or flat to custom fit the club to you.

    Close
  • Grip:
    ?

    Grip option tooltip

    The style of the grip is more often a personal choice but choosing the correct thickness can vastly improve your ball striking and accuracy. We all have different sized hands so take this into account when building your perfect club.

    Close
  • Grip Thickness:
    ?

    Grip thickness tooltip

    Choosing the correct thickness can vastly improve your ball striking and accuracy. If the grip is too thin your hands will over-rotate resulting in a pull or draw. If the grip is too thick it limits movement of the wrists, leading to a push or fade.

    Close
Estimated dispatch date: 06/08/2022
 
£149.00
Overview
The Milled Grind 3 wedge improves performance further around the greens.

This wedge features:

  • Raw Face Technology / 8620 Carbon Steel
  • ZTP RAW Grooves / Raised Micro-Ribs
  • Milled Grind Precision / Satin RAW Black Finish
  • 2-Year Guarantee

Raw Face Technology

This 8620 carbon steel wedge has an omitting plating on the face and grooves allow for added precision geometry, and optimised spin and feel.

Raised Micro-Ribs

These ribs are added in between the full grooves to provide additional face surface texture. Increasing spin even further to improve performance around the green.

ZTP RAW Grooves

To generate more spin the wedge has sharper, deeper, and narrower ZTP RAW grooves which are engineered for extra greenside spin.

Milled Grind Precision

Milled Grind wedges are precision milled to maximise consistency which is difficult to repeat by human hand. The wedge has a Thick-Thin Head design which places mass around the club head for an enhanced feel, while also optimising the CG location for precise flighting.
Code: 405922
Specification

 

Club LOFT BOUNCE LENGTH LIE SWINGWEIGHT MATERIAL FINISH
STANDARD 46° 35.75" 64° D3 8620 Carbon Steel Chrome
STANDARD 50° 35.5" 64° D3 8620 Carbon Steel Chrome/Black
STANDARD 52° 35.5" 64° D3 8620 Carbon Steel Chrome/Black
STANDARD 54° 11° 35.25" 64° D5 8620 Carbon Steel Chrome/Black
STANDARD 56° 12° 35.25" 64° D5 8620 Carbon Steel Chrome/Black
STANDARD 58° 11° 35" 64° D5 8620 Carbon Steel Chrome/Black
STANDARD 60° 10° 35" 64° D5 8620 Carbon Steel Chrome/Black
LOW 56° 35.25" 64° D5 8620 Carbon Steel Chrome/Black
LOW 58° 35" 64° D5 8620 Carbon Steel C/B(RH), Chrome (LH)
LOW 60° 35" 64° D5 8620 Carbon Steel C/B(RH), Chrome (LH)
HIGH 52° 12° 35.5" 64° D3 8620 Carbon Steel C/B(RH), Chrome (LH)
HIGH 54° 13° 35.25" 64° D5 8620 Carbon Steel Chrome/Black
HIGH 56° 14° 35.25" 64° D5 8620 Carbon Steel C/B(RH), Chrome (LH)
HIGH 58° 12° 35" 64° D5 8620 Carbon Steel Chrome/Black
HIGH 60° 12° 35" 64° D5 8620 Carbon Steel C/B(RH), Chrome (LH)
STANDARD 60° 11° 35" 64° D5 8620 Carbon Steel Chrome
Video
The Milled Grind 3 wedge improves performance further around the greens.

This wedge features:

  • Raw Face Technology / 8620 Carbon Steel
  • ZTP RAW Grooves / Raised Micro-Ribs
  • Milled Grind Precision / Satin RAW Black Finish
  • 2-Year Guarantee

Raw Face Technology

This 8620 carbon steel wedge has an omitting plating on the face and grooves allow for added precision geometry, and optimised spin and feel.

Raised Micro-Ribs

These ribs are added in between the full grooves to provide additional face surface texture. Increasing spin even further to improve performance around the green.

ZTP RAW Grooves

To generate more spin the wedge has sharper, deeper, and narrower ZTP RAW grooves which are engineered for extra greenside spin.

Milled Grind Precision

Milled Grind wedges are precision milled to maximise consistency which is difficult to repeat by human hand. The wedge has a Thick-Thin Head design which places mass around the club head for an enhanced feel, while also optimising the CG location for precise flighting.
Code: 405922

 

Club LOFT BOUNCE LENGTH LIE SWINGWEIGHT MATERIAL FINISH
STANDARD 46° 35.75" 64° D3 8620 Carbon Steel Chrome
STANDARD 50° 35.5" 64° D3 8620 Carbon Steel Chrome/Black
STANDARD 52° 35.5" 64° D3 8620 Carbon Steel Chrome/Black
STANDARD 54° 11° 35.25" 64° D5 8620 Carbon Steel Chrome/Black
STANDARD 56° 12° 35.25" 64° D5 8620 Carbon Steel Chrome/Black
STANDARD 58° 11° 35" 64° D5 8620 Carbon Steel Chrome/Black
STANDARD 60° 10° 35" 64° D5 8620 Carbon Steel Chrome/Black
LOW 56° 35.25" 64° D5 8620 Carbon Steel Chrome/Black
LOW 58° 35" 64° D5 8620 Carbon Steel C/B(RH), Chrome (LH)
LOW 60° 35" 64° D5 8620 Carbon Steel C/B(RH), Chrome (LH)
HIGH 52° 12° 35.5" 64° D3 8620 Carbon Steel C/B(RH), Chrome (LH)
HIGH 54° 13° 35.25" 64° D5 8620 Carbon Steel Chrome/Black
HIGH 56° 14° 35.25" 64° D5 8620 Carbon Steel C/B(RH), Chrome (LH)
HIGH 58° 12° 35" 64° D5 8620 Carbon Steel Chrome/Black
HIGH 60° 12° 35" 64° D5 8620 Carbon Steel C/B(RH), Chrome (LH)
STANDARD 60° 11° 35" 64° D5 8620 Carbon Steel Chrome
Specification Overview
Brand: TaylorMade
Head material: 8620 Carbon Steel
Grooves: ZTP RAW Grooves
Shaft manufacturer: Mixed
Shaft type: Steel
Dexterity: Right & Left Handed
Warranty: 2 years
Headcover included: No

Delivery